92 POS | Configuration

S.No	Features		Description
1.0	Standard Features
1.1	Processor		a) ARM9 32-bit core CPU @400 MHz
1.2	Memory		a) RAM: 128MB (DDR) b) FLASH: 256MB
1.3	Display		a) 128 x 64 pixel Graphic FSTN LCD with backlight
1.4	Keypad		a) 19 Keys keypad including 4 Function keys and 3 Command keys with back lighting
1.5	Magnetic Swipe Card Reader		a) ISO7811, 3 Track Magnetic Strip reader, bidirectional swipe & 2
1.6	Printer		a) Thermal graphic printer b) 8 dots/mm resolution
1.7	Communication Modules		a) LAN 10/100 Base-T
1.8	Interfaces/Connectors		a) RS-232 (RJ45 Connector for console and Serial file transfer) b) USB OTG c) USB Host 'A' d) SD Card Reader e) 2-SAM slots
1.9	Enclosure		a) ABS+PC
1.10	Accessories	1) Paper Roll	a) Thermal paper 57mm wide and 20Mtrs length
		2) Power Adaptor	a) 9V D.C, working on 100 to 240V A.C/50/60Hz / 2.2A with Indian 5mm Plug
		3) Battery	a) 7.4V/ 1800mAH Li-ion type
		4) Serial console cable	a) RJ45 8P8C one side with DB9 pin termination other side for PC interfaces
		5) Documentation	a) Installation Manual
2.0	Optional Features
2.1	Smart Card Reader		a) ISO 7816 compliance, contact smart Card Reader b) Dual Contact Smart Card Reader, working simultaneously c) Contact-less smart card reader with ISO 14443 A/B complian
2.2	Communication Modules	1) GSM/GPRS	a) Quad Band, b) 1x SIM Card holder c) Standard Antenna: 1x Standard Stick Antenna d) Optional Antenna: 1x Magnetic Whip Antenna (5dB with 3 meters) e) Optional Antenna: 1x GSM Magnetic Whip Antenna(5dB with 5 meters)
2.2	Communication Modules	2) CDMA	a) 1x2000 b) 1x UIM Card holders C) Standard Antenna: 1x Standard Stick Antenna d) Optional Antenna: 1x Magnetic Whip Antenna (5dB with 3 meters)
2.3	Accessories		a) USB Host (Type A) to USB Device (Type B) cable b) Holster c) Carry Bag
2.4	External Battery Charger		a) 4 batteries holder with Adaptor 9V/3A without batteries
Note: Any Customization is subject to Business Approval.